五面压盒机

双工位高速冲孔机

联系人: 徐先生
手机: 13901517341
邮箱: hs001@hs-cn.com
发布人: 江阴市月城振新印刷包装机械厂
留言咨询 更多信息
分享:
关键词: 双工位高速冲孔机           

产品介绍

双工位高速冲孔机.jpg

产品简介:

该设备采用进口倍力可调缸,出力大,调节灵活(最厚可中8mm厚密度板)。

更换盒体尺寸及冲头方便快捷。盒体宽度的调节采用滑槽加锁紧手柄, 冲孔面的宽度调节则采用塞片调节,保证冲孔始终在中心位。更换冲针也采用 插入式操作,省去反复对孔的麻烦。该设备操作简单,灵活。只需一个脚踏开 关即可自动完成双工位的冲孔及冲虚线条操作。

采用光轴直线运动单元组块,以保证冲孔精度(±0.1mm)。该设备可 提高生产效率50%左右。

The equipment imported times the force of adjustable cylinder, large output, flexible adjustment (the most thick 8mm thick MDF can be wa- shed.)

The replacement of box size and punch convenient. Adjust the width of box plus locking handle with slide, adjust the width of face punching plug- chip regulator is used to ensure the piercing has always been at the center position. Chong-pin replacement plug-in operation is also used, eliminat- ing the trouble of repeatedly on the hole. The equipment is simple and flexible. Just a foot switch can automatically duplex bit of punching and Chongxu line operation.

The use of the optical axis linear motion unit block, to ensure accurate punching (±0.1mm). The device can increase productivity by 50%. 

技术参数:

dfwfds.jpg

相关推荐+更多


扫一扫访问移动端